Skip to content

Free US shipping on all hardware · JOTS ships in 2–5 business days

Cart

Your cart is empty.

Clusters faceplate in Studies
Studies

Clusters

Harmonic Tremolo Shaper

Part of Studies

A subscription opens all of Studies, in two plugins (Studies Effects and Studies Instruments), with new devices as we release them.

Subscribe · $9/mo Download Studies free

10 devices are free.

Or own the plugin

Price: $20

The original plugin with its own interface, as a one-time purchase.

See the standalone interface

Description

Clusters is a harmonic tremolo that shapes incoming audio to pulsate, shimmer and fluctuate.

It uses a traditional tremolo signal path, then splits the sound in two at a crossover frequency. The lower part modulates at half speed, slightly out of phase with the higher part, so you hear two parts moving together at slightly fluctuating speeds. ANIMATE moves the crossover frequency itself, for anything from subtle phasing to more drastic experimental effects. OVERCLOCK pushes the rate up until the tremolo turns into ring modulation.

Clusters in the Handbook

Signal path

Clusters splits your input at the CROSSOVER frequency. The high band gets the main tremolo, set by SHAPE, AMOUNT and FLUX, and the low band gets a triangle tremolo of the same depth. ANIMATE wobbles the split point at the tremolo speed. The two bands are added back together, and BLEND mixes them with your dry sound.

  1. Rate clock

    RATE
    Sets the tremolo speed when MODE is below halfway, from one cycle every 200 seconds up to 10 Hz.
    SYNC
    Sets the tremolo speed against your host's tempo when MODE is above halfway. Its steps run from one cycle every four beats and one every two beats, up through 1 to 16 cycles a beat. Without a tempo from the host it runs at 120 BPM.
    MODE
    Below halfway the tremolo follows RATE, and above halfway it locks to your host's tempo through SYNC.
    OVERCLOCK
    Multiplies the tremolo speed by 1 to 10, in whole steps. With a high RATE it turns the tremolo into ring modulation, so use it to create harmonics, overtones, additional voices and sidebands. At 1 the low band runs at half the speed of the high band. At 2 they match, and higher settings push the low band ahead.
  2. Tremolo LFO

    AMOUNT
    Sets the depth of the tremolo. Fully up, each dip takes the sound down to silence.
    SHAPE
    Picks the waveform for the high band. The knob has four positions: TRI, SAW, SQR and RND, which glides between random levels.
    FLUX
    Sets the depth of a second LFO that pushes AMOUNT up and down, running a little slower than the tremolo. The tremolo's waveform keeps changing as a result. Turn it up for more complex syncopations and rhythmic variations.
  3. Crossover split

    CROSSOVER
    Sets the split frequency between the two bands, from 200 Hz to 1.5 kHz. Below it the sound pulses with a triangle wave, and above it the tremolo follows SHAPE.
  4. Animate LFO

    ANIMATE
    Sets how far an LFO running at the tremolo speed moves the crossover frequency. Small amounts give subtle phasing, and fully up the split swings from the very bottom to double the CROSSOVER setting.
  5. Master

    BLEND
    Sets the mix between your dry input and Clusters. It starts fully wet.
    GAIN
    Sets the output level, from silent up to double. Noon is unity.

Try thisTurn MODE past halfway to lock to your tempo, and set SHAPE to RND, with AMOUNT high, for a tempo-locked pulse that keeps changing its depth. Then raise ANIMATE so the split point wanders under it.

Demo
This video shows the standalone plugin.
Good to know

In Studies

Clusters is in Studies Effects, under Modifier.

Standalone

The standalone plugin, shown further down the page, has one RATE knob that a MANUAL / SYNC menu switches between free and synced speeds. It picks the waveform from a menu, has no dry/wet mix and calls GAIN OUTPUT. In Studies we gave RATE, SYNC and MODE their own knobs, made SHAPE a knob and added BLEND.

Bundle

The standalone plugin is also part of Decimation Tools Vol. 1.

Formats
Studies: Audio Units, VST2 and VST3 on Mac, VST3 on Windows · Apple silicon native
Systems
Current macOS and Windows 10/11 x64
Clusters | Harmonic Tremolo Shaper

Standalone version

The original plugin with its own interface, as a one-time purchase.

AU · VST2 · VST3 · macOS · Windows